SKY13414-485LF0.1-3.0GHzSP4T方案.PDFVIP

DATA SHEET SKY13414-485LF: 0.1-3.0 GHz SP4T Antenna Switch Applications •Any 2G/3G/4G antenna diversity or LTE (TDD/FDD) transmit/receive system for which GSM transmit is not required Features •Broadband frequency range: 0.1 to 3.0 GHz •Low insertion loss: 0.45 dB typical @ 2.7 GHz •High isolation: 31 dB @ 2.7 GHz •Internal 50 Ωport to control diversity antenna impedance when device is not in use •Integrated logic •Small QFN (14-pin, 2.0 x 2.0 mm) package (MSL1, 260 °C per JEDEC J-STD-020) Figure 1. SKY13414-485LF Block Diagram Switching is controlled by three CMOS/TTL-compatible control voltage inputs (V1, V2, and V3). Depending on the logic voltage Description level applied to the control pins, the ANT pin is connected to one of four switched RF outputs (RF1 to RF4) using a low insertion loss The SKY13414-485LF is a Single Pole, Four-Throw (SP4T) path, while the paths between the ANT pin and the other RF pins antenna switch. With an internal 50 Ωtermination. The high are in a high isolation state. The antenna path can also be closed linearity performance and low insertion loss achieved by the on a 50 Ωload when it needs to be terminated. The 50 Ωload is SKY13414-485LF make it an ideal choice for main/diversity internally grounded. No external blocking capacitors are required switching commonly used in LTE-based handsets, data cards, and on the RF paths unless VDC is externally applied. tablets that use antenna diversi