某带地下室托换结构的高层框剪结构设计_凌育洪.pdfVIP

40 4 　　　 2010 4 1 2, 3 1 1 凌育洪 , 　陈庆军 , 　方小丹, 　江　毅 (1 , 510641;2 , 510641; 3 , 510641) [] 　-, 、、。 , 。 , 。 [] 　;;; Design of a high-rise frame-shear wall structure with the underpinning structure at basement 1 2, 3 1 1 Ling Yuhong , Chen Qingjun , Fang Xiaodan , Jiang Yi (1 Architecture Design Research nstitute, South China University of Technology, Guangzhou 510641, China; 2 School of Civil and Transportation Engineering, South China University of Technology, Guangzhou 510641, China; 3 State Key Laboratory of Subtropical Building Science, Guangzhou 510641, China) Abstract:Design of a high-rise reinforced concrete frame-shear wall structure was presented, which includes the underpinning structure design at basement, the upper structure design and the settlement observation.Because the subway tunnel will pass through the bottom of the building, the underpinning structure which utilizing the whole storey for bearing structure was used at the basement.The structural analysis show s that the underpinning structure behaviors are similar with the original structure.The observation show s that the settlement of the structure with the underpinning structure is uniform. Keywords:basement;underpinning structure;high-rise structure;frame-shear wall structure 1 　 , 3 ( ), 26 (、 ), 99.30m, 3.23 2 m 。1 , -, 2 。 , 、 、。 , , Ⅱ, , 7 , 2 0.10g 。50 0.5kN m , 2 100 0.6kN m 。 C , 1.3。 2 　 3 , 1　 　 , 。4 , 12m 。3