铁路信号电缆的说明.docxVIP

铁路信号电缆说明1、电缆用途本产品适用于额定电压交流750V或直流1100V铁路信号系统轨道电路、列控自动装置和超速防护系统地面设备、计轴、车站电码化、微机联锁、计算机监测、调度集中、调度监督、大功率电动转辙机等有关信号控制装置和设备之间传输控制信息，监测信息和电能，可做为DMIS底层系统数字信息和业务电话的传输通道。当用于ZPW—2000、UM71无绝缘轨道电路自动闭塞时，传输距离可达10km。其中内屏蔽铁路数字信号电缆，对传输四线组进行了单独屏蔽（分A型、B型，结构及电缆组序排列见示意图），因而提高了电缆近端串音衰减，有效解决了在同根电缆内传输相同频率的铁路信号信息时，各传输线组之间的干扰防卫问题。达到信号系统及设备之间，同缆同数量级电平的同频信息及最高2Mbit/s数字信息传输。同时可在铁路电气化和非电气化区段使用。本电缆除基本型外还有阻燃型、防白蚁型、耐寒型、高屏蔽型等用于特殊环境的产品。在电缆制造工艺方面，电缆主要原材料选用与IEC国际标准规定基本一致。绝缘导电线芯采用具有国际先进水平的皮-泡-皮物理发泡三层共挤技术。2、电缆使用特性2.1 电缆导体长期工作温度不超过70℃； Use of the cable The product is suitable for signal system track circuit for railway with rated voltage AC 750V or DC 1100V, train controlling automatic equipment and ground equipment of super-speed guarding system, axle counting system, station code, microcomputer interlocking, microcomputer monitoring system, and transmitting controlling information, monitoring information or power between signal equipment and control equipment such as some high-power electro-motive switch. The cable can be served as communication channel for DMIS skeleton information, business telephone or local communication.The cable is suitable for ZPW-2000 and UM71 non-insulated rail circuit automatic blocking system, can meet the requirement of 10km transmission. Inner screen digital signal cable for railway, make separated shielding for transmit quad group (divided into A and B type, see the cable groups arrange the sketch map in structure), so increased near-end cross-talk attenuation of cable, effectively solved interference and defend problem in transmit line groups while transmit the railway signal information of the same frequency with the one cable. It has the transmit ability of same frequency of same level in one cable and transmit up to 2Mbit/s digital information between signal system and equipment. It can be used in section with electrifiedThere are flame-retardant, anti-termite, cold-resistant and high screening types cables for special environmentIn manufacturing processing of the cabl