5053补充(国外英语资料).doc

5053补充(国外英语资料) 1. after the brake light is a hollow circle: buy a version of this car is not necessarily the same encoding. If you want to change, you can refer to, in advance to do backup: access to the 09 unit, select the encoder control, enter the long code, select the encoding help, select the 9byte, the code changed to 00 can. 5053 coding arrangement For collection, forward once: 5053 coding report, apply to a wide range of riders themselves Automatic headlamp The 2 pin on the automatic headlamp switch is connected to the G519 controller E14. Two. Rain sensor The 1 leg of the rain sensor is FireWire access (the circuit is connected to the SC13, which has been occupied and is recommended to be connected to the SC17, SC13 and SC17 as a control firing line); The rain sensor is 2 feet with zero line grounding; The rain sensor 3 is connected to the G519 on the signal control line F3. Three 、 anti dazzle eyepiece in car Anti glare glasses in the car, 1 feet are FireWire access (the circuit is connected to the SC4, the insurance has been occupied, it is recommended to receive the SC5, SC4 and SC5 as a control FireWire); Anti glare glasses in the car, 2 feet for the zero line grounding; The anti glare mirror in the car is connected with the C12 on the signal control line G519 with 3 feet. The control signal line is controlled by the reversing light, and the reverse gear is used to automatically turn off the rear view and prevent glare; Four, open automatic headlight and go home, leave home function 1, open the 09 module; 2, select 07 encoding; 3, the selection of long encoding help, byte will be 0 below 5 (home function) and 6 (photosensitive, rainfall sensor (home), 7 function) tick after save and exit. 4, adjust the time, away from home, enter, 10, in the channel number in the input 01, will be the new value to 10~120 any time after completion of their preservation; then enter the channel number in the input 02, will be the new value to 10~120 any time after save yo