5轴主轴头选项文件设置(国外英语资料).doc

5轴主轴头选项文件设置(国外英语资料) 5 axis main shaft options file settings (Up, dated, 31/01/2001) The following link is given a 5 axis spindle example: - (spindle head shaft icon) Fourth requirements for rotating shafts and fifth rotating shafts Following are the contents of the multi axis rotary processing that need to be defined in the options file. : - (the example defines three main rotating shafts, A, B, and C, but in actual applications, multiple rotating shaft machining systems use only two of them. ) Define format (A B C) may have defined ## built-in source file Metric formats Leading zeros = false Trailing zeros = true Decimal point = true Decimal places = 3 Imperial formats Leading zeros = false Trailing zeros = true Decimal point = true Decimal places = 4 End define Word = order (A + B C) ## only when the intermediate built-in sort of word list is not required Block order = true ## does not consider the built-in sort list, use the define block xxx. ranking Define keys Azimuth axis = C ## fourth rotation axis is usually the azimuth (column turning) Elevation axis = B ## fifth rotary shaft (spindle) is usually elevation End define ## A, and / or B and / or C are to be inserted into the Rapid and Linear in linear program segment, and its axis alignment. (example illustration, B revolves around Y, C revolves around Z) Define block move rapid N; G1; G2; G3; G6; X; Y; Z; B;; C; S; H; M1; M2 End define Define block move linear N; G1; G2; X; Y; Z;; B; C; F; M1; M2 End define -------------------------------------------------------------------------------- Rotation axis parameter setting The following parameters should be included in the rotation axis option. Spindle azimuth rotation = true ## rotary table defaults to false Spindle elevation rotation = true ## rotary table defaults to false The column column is defined, and the spindle spindle is the slewing shaft. Azimuth, axis, parameters = (000001) Elevation, axis, parameters = (000010) Here, the first three digits of the tw