linux应用程序的文件系统(国外英语资料).docVIP

linux应用程序的文件系统(国外英语资料) How does the file system of the Linux application be made? Questioner: 2011-4-25 17:36 asads6543 | Views: 94 Recommended answer 2011-4-26 16:37 first tell you dont be afraid, according to the prompt, you can install, and then look at the following words: Installation of Linux under Windows system HQY was published in 2004-12-10 18:25:00 Do you want to use both the Windows and Linux systems on the same computer? You must first learn to install the Linux system on a computer that has installed the Windows system. For systems where Windows/Linux multiple operating systems coexist, the installation order is to install the Windows system first, and then the Linux. Here we describe how to install RedHat Linux 9 on a single hard disk that has been installed with the Windows system. Linux preparation before installation 1. collect hardware information with the Windows system Before you install Linux, you need to use the Windows system to understand basic information about your computer hardware, such as memory size, sound cards, monitors, mouse and graphics cards, etc.. 2. set the boot system from the CD Linux supports several installations, but it is most convenient and fast to install directly from the boot disk. To start the machine with disk, you need to modify the BIOS settings and change the CD-ROM to the first place in the boot sequence. 3.Linux partition Representation methods for Linux partitions Partitioning is the separation of disk drives into separate zones, each of which is like a single disk drive. Under the DOS/Windows system, disk partitions can be divided into C, D, and E disks. But Linux uses the disk as a block device file to manage use. It begins with a /dev (device acronym). Example: Windows said under the C drive with /dev/hda1 in Linux Of which: HD stands for IDE hard disk (SCSI hard disk with SD); HDA is the first IDE hard disk (the second is HDB); /dev/hda1 is the main partition; logical partition starts from 5, such as /dev