内存优化攻略大放送(国外英语资料).docVIP

内存优化攻略大放送(国外英语资料) Namely, Host Clock (bus frequency and memory operating frequency synchronization), Hclk-33M (bus frequency minus 33M), Hclk+33M and other three modes. You can choose appropriate overclocking memory when the last item, the memory frequency is 33MHz higher than the system memory overclocking FSB, fully tap the potential and improve the system performance. MSI 845G MAX is a 533MHz P4 motherboard FSB, while Intel claims that 845G only supports DDR266 (133MHz * 2) memory, but the board added asynchronous memory function in BIOS, according to the ratio of 4:5 memory can be run in 166MHz, which supports DDR333 (166MHz * 2), and to improve the memory bandwidth to 2.66GB/s, 400MHz has been close to the FSB P4 need 3.2GB/s bandwidth. The specific operation into the BIOS Advanced Chipset Features, DRAM Timing, Setting DRAM Frequency (memory frequency), SPD, 200MHz, visible here are 266MHz, 333MHz, Auto and other options can directly select the 333MHz (Figure 2). (2) memory interleaving Memory interleaving (DRAM Bank Interleave) via (VIA) chip group is used to improve the memory performance of a technology, can provide more transmission pipeline with higher memory bandwidth, the memory within the same time multiple write / read operations at the same time, so as to effectively improve the system performance. Interleaved memory running mode, there are 2 main interleaved (2-Bank Interleave) and 4 Interleave (4-Bank). To ensure system stability, many motherboards based on the VIA chipset shut down memory interleave mode by default or run at least 2 ways by default. When you optimize memory performance, you can open it by simply setting it up in BIOS. With a P4PB via 400 motherboard for example, after entering the BIOS in Frequency/Voltage Control to find Bank Interleave (channel interleaving), there is Disable (disabled), 2 Bank, 4 Bank and other three kinds of patterns. To optimize memory, of course, select 4 Bank to improve memory performance. Virtual memory s