实木套装门(国外英语资料).docVIP

实木套装门(国外英语资料) Process for making a suit door: Door making of traditional arts and crafts: (1) low price door (800 yuan), the wood substrate frame, inside the hollow or filled with leftover materials, honeycomb paperboard, both sides with 4mm MDF paste as balance layer surface with PVC film grain leather hand. Has the advantages of low cost, simple manufacturing process, PVC has a certain toughness and anti impact; disadvantages: non wood fiber board substrate, formaldehyde content high, not easy deformation, moistureproof, PVC paper is easy to change aging, fall off, surface feel bad, dull. (2) midprice composite doors (800-1500 million), by the wood substrate framework, the internal use of finger joint wood materials, both sides with 4mm MDF paste as balance layer with wood paper veneer surface, surface painting process (low price no paint program). Advantages: the process is relatively simple, moderate price, good gloss, solid wood composite substrate. Disadvantages: the formaldehyde content of the fiber board is high, the surface of the spray paint is not wearable, and the utility model does not resist the impact, and is easy to remove paint and change color; the fiber plate balance layer and the wood grain paper veneer are not damp proof, and are easy to deform and become warped. (3) high-grade solid wood doors (1500 yuan), made of solid wood substrate framework, internal use of finger joint wood materials, both sides with 4mm MDF paste as balance layer surface with solid wood bark veneer, surface coating technology (higher grade piano paint surface, room doors is). Advantages: good gloss, feel delicate, solid wood substrate, paint surface is not easy to fall off naturally, color change, high grade. Disadvantages: high price, complex process, paint surface is not wear-resistant, no impact, fiber formaldehyde content is high, fiber board balance layer and solid wood bark veneer is not moisture-proof, easy deformation and skin. Heshijia polymer composite wood doo