液压英文文献翻译.doc

毕业论文外文文献翻译 班级： 10机自3班 姓名： 易太平 学号： 1021080346 2013 年 11 月 25 日 Statistical investigation of hydraulic driven circular interpolation motions AHMET MURAT PINAR1, ABDULKADIR GULLU2 and SEZAI TASKIN3,? 1Mechanical and Metal Technologies Department, Celal Bayar University,45400 Turgutlu-Manisa, Turkey 2Mechanical Education Department, Gazi University, 06500 Ankara, Turkey 3Electrical and Electronics Engineering Department, Celal Bayar University,45140 Manisa, Turkey e-mail: ahmet.pinar@cbu.edu.tr; agullu@gazi.edu.tr; sezai.taskin@cbu.edu.tr MS received 30 October 2010; revised 3 August 2011; accepted 29 September 2011 Abstract. In this study, a twin-axis gantry has been structured to examine hydraulic driven positioning skills of the curvilinear motions based on ISO 230-4 standard enti-tled ‘Circular tests for numerically controlled machine tools’. The system is controlled by a path and position control module of a PLC device. As a result of the exper-iments conducted based on the full factorial design, the effects of piston diameter,feed rate, radius and their two-way interactions on the circularity error are determined through analysis of variance. Accordingly, minimum circularity error is obtained with the piston diameter of 63 mm, inertia load of 12.5 kg, radius of 5 mm and feed rate of 50 mm/min as 0.345 mm. Circularity error increases with the increase of inertia load, radius and feed rate, and declines with the increase of piston diameter. Lastly, piston diameter has the greatest effect on the circularity error change and followed by radius,feed rate, piston diameter–radius, radius–feed rate, piston diameter-feed-rate, inertia load, piston diameter–inertia load, and inertia load–radius factors and interactions. Keywords. CNC; circularity error; circular interpolatio