科技交流英语ppt.pptxVIP

3D Geology Modeling from 2D Prospecting Line Profile Map No.1 Group of GIS Members :Ding Jiashu Zheng Shangxiong Yang Lusheng Lan Lei Contents 1 Introduction 2 The Composition of Prospecting Profile Data 3 The Overall Shape and Conversion Process of Prospecting Line Profile 4 5 Experiments Conclusions 1.Introduction This Paper List two method: 1. Li et al:conversion to 3D profile into 2D profile based feature points and prospecting line azimuth and gave a conversion formula that converted 2D profile into 3Dprofile. 2. Chen et al:proposed automatic formation method of prospecting line profile map based on drill hole database, which was visualization of 2Dmine data. This paper presents the concept of “updating dimension”, which converts 2D profile into 3D model. Four steps as follows: Constructing 3D prospecting line profile frame; 2D points of on 2D profile are converted into 3D points on 3D profile section by section; Adding switch control points for the long line crossover two egments; Upgrading feature dimension from 1D curve feature in3D profile to 2D surface in 3D model. 2. The Composition of Prospectingine Profile Data The main contents are strata, tectonic, alteration, ore bodies and different types of natural or industrial grade ore distribution. Entities needed drawing in geological profile map includes profile azimuth, drills, lithology, orebody, grade, sampling, strata boundary, fault, borehole and other geological factors which has a close relationship with the reconstruction of the 3D geological modeling. In the view of geographical information science , diverse contents of prospecting line profile map could be abstracted as spatial features such as points, curves, polygon and annotes. Geographic information science uses the combination of points, curves and polygon to describe geometrical and topological characteristics of the geological phenomenon on the prospecting line profile. 2. The Composition of Prospectingine Profile Data A p