电子束辐射固化环氧树脂的动态力学分析_辐射剂量_引发剂用量及热处理的影响.pdfVIP

复 合材 料学报 19 3 6 2002 ACTA MATERIAE COMPOSITAE SI ICA　　　　　　　　　　　　　　　　 Vol. 19 o. 3 June 2002 : 1000-3851(2002) 03-0010-06 1 1 2 1 1 隋　刚 , 张佐光, 李凤梅, 陈昌麒 , 袁宇慧 ( 1. , 100083; 2. , 100875) :tan , T , , g , , ,, , : ; ; ; ; ; ; : 332; 644. 2: T B O A DYNAMIC MECHANICAL ANALYSIS OF ELECTRON BEAM CURED EPOXY RESINS INFLUENCE OF RADIATION DOSAGE, INITIATOR DOSAGE AND HEAT TREATMENT 1 1 2 1 1 SUI Gang , ZHA G Zuo-guang , LI Feng-mei , CHE Chang-qi , YUA Yu-hui ( 1. School of Materials Science and Engineering, Beijing University of Aeronautics Astronautics, Beijing 100083,China; 2. Institute of Low Energy uclear Physics, Beijing ormal University, Beijing 100875,China) : - . Abstract Dynamicmechanical analyses of EB cured epoxy resin aremade Through theresearch on variation regularity of the gel fraction, damping factor and dynamic modulus for different samples, the influences of EB radiation dosage, initiator dosage and heating treatment on radiation curing reac- tion of epoxy resin wereobtained T he gel fraction glass transition temperature and high temperature. , modulus of the cured epoxy resin increasewith therising of radiation dosage and the increased extents are decrescent at high radiation dosage. T he inhomogeneity degree of cross-linked structure is en- hanced with the increasing radiation dosage. In low radiation dosage, the glass transition temperature and high temperature modulus of the cured epoxy resin incr