第六章 AS443替换HONEYWELL SS43F.pdfVIP

FEATURES GENERAL DESCRIPTION  Hall Effect Sensor Switch The AS443 is a Hall-effect sensor switch for high  Operating Voltage: 3.5V~24V temperature operation. The device includes an  Output Sink Current: 50mA on-chip Hall voltage generator for magnetic sensing,  Built-in Reverse Polarity Protection an amplifier to amplify Hall voltage, and a  Operating Temperature: -40°C ~ +150°C comparator to provide switching hysteresis for noise  Low Profile Package: SIP-3L rejection, and an open-collector output pre-driver. An internal bandgap regulator is used to provide temperature compensated supply voltage for internal APPLICATIONS circuits and allows a wide operating supply range.  Brushless DC Motor Commutation If a magnetic flux density (B) is larger than operation  Speed and RPM Sensing point (Bop), OUT will turn on (Low) If BBrp, DO will  Motor and Fan Control turn off. AS443 is rated for operation over  Tachometer, Counter Pickup temperature range from -40°C to +150°C and voltage range from 3.5V to 24V. The devices are available in low profile SIP-3L packages. TYPICAL APPLICATION CIRCUIT AS443 Rev2.0