网络部分教案5--路由.ppt

* Purpose: This figure describes how a static route operates. Emphasize: For intercommunication, static routes must be configured in both directions. Static routes are often used to route traffic to a stub network or other network where only a single route to that network exists. * * Purpose: This figure gives an example of a default route configuration. Emphasize: With an address and subnet mask of in the ip route statement, packets for any network not listed in the routing table will be sent to the next hop, . * Purpose: This figure gives an example of a default route configuration. Emphasize: With an address and subnet mask of in the ip route statement, packets for any network not listed in the routing table will be sent to the next hop, . * Purpose: This figure gives an example of a default route configuration. Emphasize: With an address and subnet mask of in the ip route statement, packets for any network not listed in the routing table will be sent to the next hop, . * Purpose: This figure gives an example of a default route configuration. Emphasize: With an address and subnet mask of in the ip route statement, packets for any network not listed in the routing table will be sent to the next hop, . * Purpose: This figure introduces students to routing protocols and compares routing protocols to routed protocols. Emphasize: If network wants to know about network , it must learn it from its S0 (or possibly S1) interface. Note: The two routing protocols that will be taught in this course are RIP and IGRP. They are both distance vector routing protocols. * 5 Purpose: This figure introduces administrative distance. Emphasize: An administrative distance is a rating of the trustworthiness of a routing information source, such as an individual router or a group of routers. In a large network, some routing protocols and some routers can be more reliable than others as sources of routing information. The default administrative distance for static ro