三、钠离子交换器.docVIP

三、钠离子交换器 Sodium ion exchanger 1．说明 无顶压逆流再生钠离子交换器具有逆流再生的一切优点，并省去了顶压系统，简化了操作，节省了投资及运行费用。因此是目前软化水中最先进的设备。 1 and instructions No pressure sodium ion exchange counter-flow has all the advantages of counter-flow omitted, and high pressure system and simplify the operation, save investment and running costs. So is the most advanced equipment, water softening. 2、 技术标准 ① 无顶压逆流再生钠离子交换器为焊接碳钢结构的园柱形容器， ② 阳床本体内部衬胶厚度为4.5mm，接管衬胶到各法兰的密封面。设备内部的其它需防腐的非衬胶件材质为316L不锈钢材质。 ③ 钠离子交换器内装设上部配水装置、底部集水装置、底部出水装置、中间排再生液装置和其附件。上部配水装置为头式结构,采用316L不锈钢丝绕管大喷头布水方式、底部出水装置均采用孔板及排水帽的配水方式,水帽为塔式结构,材质为ABS,水帽缝隙为0.25mm,底部出水装置为挡水板结构。 ④底多孔板与下封头间采用无缝管加强,加强管共设3套。 ⑤ 钠离子交换器内的配水和集水装置，，mm。 ⑥ 钠离子交换器的外部本体管路(一次阀门前)为衬胶管,衬胶厚度为3mm,底部出水管配有法兰仪表接口。每台钠离子交换器配有2个标准的(500mm旋吊式侧人孔及一个底部人孔。人孔盖内表面和器壁内表面持平。人孔配有人孔盖、垫圈、螺栓、螺母和起吊杆等全套部件。 ⑦每台钠离子交换器配有两对窥视孔，cm宽、37cm高， ⑧ 每台阳床侧壁留有两个输送树脂的法兰接口。 ⑨ 每台钠离子交换器配有进水阀、出水阀、反洗进水阀、反洗排水阀、小反洗进水阀、正洗排水阀、再生液进口阀、再生液出口阀和排空气阀等。 ⑩其它附件及材质: 进水取样管: 材质:1Cr18Ni9Ti 进水取样阀: 材质:1Cr18Ni9Ti 出水取样管: 材质:1Cr18Ni9Ti 出水取样阀: 材质:1Cr18Ni9Ti 压力表: 耐腐蚀 钠离子交换器的内部件在工厂安装定位，，2, the technical standard 1 no pressure counter-flow natrium ion exchanger for welding of steel structure column container garden, top and bottom for elliptic sealing head, according to standard equipment design, manufacturing and testing, involved in implementation of standard meter standard. 2.Yang (internal lining rubber thickness bed ontology to 4.5 mm, rubber lining to each flange friction. The other anticorrosive equipment within the lining rubber parts for 316L stainless steel material qualitative. 3.Sodium ion exchanger (upper installed within a water device, bottom bottom water catchment device, liquid regeneration device, the middle line and its attachments. The water head type structure for using 316L stainless steel wire, big round pipe nozzle cloth of water, water device adopts hole bottom plate and the water drainage cap, water tower structure, material for cap for ABS, water cap for 0.25 mm, bottom ape