中空料.PDFVIP

中空料 Blow Molding Grade 产品简介 产品包装及贮运要求 中国石化高密度聚乙烯中空料密度较大，模量高，刚性、韧 产品采用聚丙烯内涂膜编织袋、牛皮纸包装袋或聚乙烯复合 性好，耐环境应力开裂性能良好，加工性能优异，适用于中 薄膜包装袋包装，净重25Kg/袋。 空吹塑中型或大型装运液体的容器。 产品应存放在通风、干燥的仓库内，远离火源，防止阳光直 接照射，不得露天堆放。产品运输时不得在阳光下曝晒或雨 Overview 淋，不得与沙土、碎金属、煤炭、玻璃等混合装运，更不可 Sinopec HDPE blow molding grade features high density, modulus and rigidity, good env ironmental st ress crack resistanse and 与有毒物质、腐蚀性和易燃物品混装。 excellent processability. The resin is suitable for making large and Package, Storage and Transportation medium-sized containers holding liquids by blow-molding. The resin is packaged in internally film-coated polypropy lene woven bags, brown paper bags or laminated polyethylene film 产品用途 bags. The net weight is 25Kg/bag. 高密度聚乙烯中空料产品可以用于中空吹塑牛奶瓶、果汁 The resin should be stored in a drafty, dry warehouse and away 瓶、化妆品瓶、人造黄油罐、齿轮油桶、汽车用润滑油桶等 from fire and direct sunlight. It should not be piled up in the open 小型中空容器，也可用于中空吹塑IBC集装桶、大型玩具、 air. During transportation, the material should not be exposed to strong sunlight or rain and should not be transported together with 漂浮物、包装桶等大中型容器。 sand, soil, scrap metal, coal or glass. Transportation t