公称压力(国外英语资料).docVIP

公称压力 Nominal pressure PN (MPa): reference value relating to the pressure resistance of piping system components. For easy use, usually the priority of the R10 series is taken. Nominal pressure refers to the pipe in the two temperature (20 degrees Celsius) when the water delivery pressure. If the water temperature is between 25 and -45 degrees, the coefficient of temperature drop should be adjusted to correct the working pressure. Nominal pressure PN is a digital indication of pressure related signs, which is a convenient round integer for reference. All the pipelines attached to the same nominal diameter indicated by the same nominal pressure PN have the same connecting dimension as the end connection type. Working pressure is the maximum continuous running pressure on the pipe wall under normal working condition of water supply pipe, excluding fluctuation pressure of water. Design pressure refers to the maximum instantaneous pressure acting on the pipe wall by the water supply pipe system. The sum of working pressure and residual water hammer is generally used. Nominal pressure is a nominal pressure that is artificially prescribed for design, manufacture, and use. The unit of nominal pressure is actually the pressure, and the pressure is commonly known in Chinese. The unit is Pa instead of N. Nominal pressure in English is Nominal, pressure, nominal, in, name, form, or, but, not, in, reality (nominal, nominal). The nominal pressure of a pressure vessel refers to the nominal pressure [2] of the flange of the pressure vessel. Pressure vessel flange nominal pressure is generally divided into 7 grades, that is, 0.25, 0.60, 1, 1.60,, 2.50, 4, 6., and so on. The nominal pressure of the flange is determined by the maximum operating pressure of the flange, the operating temperature, and the flange material. Because the calculation of the flange thickness in the formulation of the flange size series, when is Q345R at 200 DEG C of the mechanical properties for benchmarking,