兰大《钢结构设计原理》13春在线作业2(国外英语资料).doc

兰大《钢结构设计原理》13春在线作业2 14 spring 13 autumn big blue steel structure design principle 13 spring online homework 2 Total score: 100 test time: - Radio examination A multiple-choice question Judgment question Radio examination questions (10 questions, 30 points). Radio) The 1. axis force member is connected with the side weld seam, and the shear stress on the effective section of the side weld is distributed along the length direction of the weld A. is big at both ends, small in the middle B. is small at both ends, big in the middle C. uniform distribution D. linear distribution Full marks: 3 2. the specification specifies that welds shall be divided into several grades according to their inspection methods and quality requirements A. 1 B. 2 C. 3 D. 4 Full marks: 3 3. the specification specifies that the length of the side weld shall not exceed 60 HF, because the side weld is too long () A. uneconomical The stress concentration at the B. crater has a great influence on each other The C. calculation is unreliable D. is not convenient for construction Full marks: 3 The 4. specification stipulates that the design value of tensile strength of ordinary bolts only takes 0.8 times of the design value of the tensile strength of the bolt steel A. partial safety considerations B. may have an eccentric effect when considering actual action The adverse effect of prying force on C. D. the above A, B, C Full marks: 3 The method of checking the local stability of steel member under 5. axial compression is A. and the overall stability of the same check B. stress checking is the ratio of width to thickness, and is considered as slender column. C. checking the width to thickness ratio, and considered as coarse short column D. checking stiffness Full marks: 3 6., the answer has not uploaded, first for everyone to review the use, and if you need to answer the specific, look at my registration name to find the economic height of the beam is the principle of () A. makes the shortest time B. u