关 于 采 暖 方 式 的 种 类 介 绍(国外英语资料).doc

关 于 采 暖 方 式 的 种 类 介 绍 Introduction to the types of heating methods Article source: Central heating: the main force of urban heating Principle: the urban heat supply network, regional heat supply network or larger scale central heating system as the heat source, will probably remain the main mode of urban residential heating at present and for a period of time to come. Applicable residence: ordinary residence (most residential areas in the city) Advantage： 1., the technology is relatively mature, safe and reliable, easy to use, cheap. 2. 24 hours a day heating. Shortcoming: 1. heating time and temperature can not control themselves, vertical heat sink unsightly, accounting for space, affecting the decoration effect. 2. there is no heat source before and after heating period. 3. heat sink heating, general water temperature above 70 degrees Celsius, but when the temperature reached 80 degrees will produce dust mass, so that the top of the heating wall covered with dust. Cost： To 100 square metres of living room, for example, according to the provisions of Beijing, gas heating operation and payment costs of 24 yuan / square meter. A heating season to pay 2400 yuan. Two, the floor heating room temperature gradually decreased from bottom to top: Principle: low temperature radiant floor heating is heating through the laying on the floor of the pipe, aluminum-plastic composite pipe or a conductive pipe, the floor heating to the surface temperature of 18 to 32 degrees Celsius, evenly to the indoor heat radiation heating and achieve results. At the same time, it can be divided into household gas heating stove, municipal heating pipe network, district boiler room and other different ways to provide heat source. Suitable accommodation: refined decoration Apartments (dawn garden, beautiful garden, Mokexingyuan, Dongrunfengjing) Advantage： 1., the ground temperature is uniform, the room temperature is gradually decreasing from top to bottom, and the comfort is high. 2. air conve