场景设置(国外英语资料).docVIP

场景设置 1 scenario design ideas for performance testing Some time ago, I am pleased to receive the performance of Zhuhai X company, ha ha, the following is a summary of the companys product performance testing. Personally, the performance testing scenarios are actually better, with a focus on performance testing. The validation test is used to verify the specific setting, time, pressure, environment and operation mode of the system can run normally, application server, system and network environment, software and hardware facilities can also use a good support to these cases of users. The verification test is aimed at the explicit pressure target and expected result, and verifies that the system can achieve the expected result under the pressure. The main points are as follows: Stress test: the number of users during the peak period of the system is known to verify that the transaction response time can reach customer requirements at the maximum number of concurrent transactions (through peak number conversion). Is the system performance within normal values at this pressure?. Whether the system will cause adverse reactions due to such pressure (such as: abort application downtime, etc.). Ramp Up: incremental design such as concurrent users for 75 people, the system of registered users for 1500 people, with the reference value of concurrent users as 5% - 7%. In general, the design of pressurization is carried out by loading 5 persons per 15s, which is mainly referenced to test the performance of the press machine. It is suggested that Run be made several times. Measure the actual load by transaction passing rate and error rate. Ramp Up incremental design goal: find incremental pressure system performance bottleneck position, seize opportunity performance inflection point appears, the commonly used reference Hits click rate and throughput, CPU and memory usage of the comprehensive judgment. Simulation peak use number, such as the morning login, quit after work, wages s