多晶硅铸锭炉生产工艺控制技术和设备组(国外英语资料).doc

多晶硅铸锭炉生产工艺控制技术和设备组 Polysilicon ingot furnace production process control technology and equipment group.Txt do not give up on themselves! (mom once said to me, the moment I turned round to go out, I burst into tears and didnt want anyone to see it!) To see this one small heart feeling, think of when I left home to thousands of miles away, my mother also said something similar, but as a man, you must create a day, in order to repay their parents!! Polycrystalline silicon ingot furnace is the most important in the solar photovoltaic industry One of the equipment. It is obtained by using chemical methods of high-purity silicon Melting is adjusted to become a chemical composition suitable for solar cells The silicon ingot is made from the dissolved body by the solidification technique of the long crystal. So you can slice it For solar cells. The main growth method used in polycrystalline silicon ingot furnace is heat exchange method Combined with the Bridgeman method. This type of crystal furnace is in addition During the thermal process, the insulation layer and the heat insulation layer at the bottom are tightly closed, and the utility model is guaranteed to be added During heating, the heat inside does not leak in large quantities, thereby ensuring the effectiveness of heating J temperature and heating the students. When it begins to crystallize, fill the protective gas and fill it with molten The crucible of the silicon melting material does not move, and the insulating layer moves upwards slowly, and the bottom of the crucible is moved upwards The heat through the gap between the insulation layer and the heat insulation layer of the hair shed The bottom holder of the crucible is gradually reduced by replacing the heat between the gas and the furnace wall Temperature. In this process, the crystalline crystals leave the heating step by step The molten silicon is still in the heating zone. So in crystallization During the process, a relatively stable temperature gradie