大棚钢架施工组织设计1(国外英语资料).docVIP

大棚钢架施工组织设计1 Chapter 1 general situation of the Project 1.1 introduction of the project This project is a stainless steel entrance hall space truss structure project. This project adopts bottom column support, is four square pyramid form, the total projection area of 36.84 square meters. 1.2 production and processing features This project should be arranged reasonably in the process of production, and ensure the normal operation of each process. First of all, the blanking size of each rod must be accurate, and the welding shrinkage and other factors that influence the size are taken into account. The bolt ball machining surface size to be precise, the angle error is controlled within 6159. Bolt, sealing plate, taper head, sleeve, top wire and other parts shall be checked and accepted in accordance with the corresponding standards and specifications, so as to ensure the quality of the grid. 1.3 the design, construction and acceptance of space trusses must comply with the following specifications: Space truss structure and construction code JGJ7 - 91; Standard for quality inspection and evaluation of space truss structures JGJ78 - 91; Code for design of steel structures, GBJ17 - 88; Standard for steel grid industry, JGJ75.1 - 75.3 - 91; High strength bolts for bolted joints of steel grids GB/T16939; Code for loading of building structures GBJ9 - 87. The second chapter is making and processing 2.1 processing range 2.1.1 this project is a stainless steel space truss project, and the materials should be made sure that the material meets the design requirements. 2.1.2 material preparation contract for advance payment in place within 5 days after the ready, then began to organize production and processing, processing for 5 days; the rack in the installation process, for the period of 5 days, to ensure completion within the period stipulated in the contract. 2.2 operation procedure Material incoming inspection, lofting, measuring, cutting, spot welding, welding, inspection,