如何理解与实施设计和开发过程(国外英语资料).doc

如何理解与实施设计和开发过程 Judging from the situation of the organization of the project investigation and organization, the design and control of the 4.4 elements of the 94 edition standard has always been the difficult point of the implementation of the organization. Because of the design and design of geotechnical engineering structure design content compared with simple, short cycle, no internal interface in general (internal interface when the interface is not complicated), and at the time of signing the contract, the contract terms are rarely involved in the design of content. In the light of the particularity of geotechnical engineering design, the author discusses his opinions on how to design and develop control procedures during the design and development of the GB/T 19001-2000 standard 7.3. First, the scope of geotechnical engineering design and development control (1) foundation treatment; (2) foundation pit support, slope support and so on; (3) Engineering precipitation. The difference between the two and 2000 edition standards and the 94 edition standard (1) the 94 edition of standard 4.4.1 requires that the supplier shall establish and maintain documented procedures for product design, control and verification. 2000 edition standard does not have this request, only requests to the product design and the development plan and the control.. (2) the 2000 edition of standard 7.3.1 design and development is a combination of the 94 edition of standard 4.4.2 design and development planning and the 4.4.3 organization and technical interface. The 94 edition standard requires the interface information to be documented and reviewed periodically. The 2000 edition standard requires only the interface management. The management style can be decided by the organization itself. The purpose is to achieve clear responsibilities and effective communication of interface information. (3) the design input in the 94 edition of standard 4.4.4 design requires that the design input be docu