如何用色彩设置CAD的线宽(国外英语资料).doc

怎样用颜色设置CAD的线宽 How do I set the line width of CAD in color? In mechanical drawing, in order to clearly express graphic information, the national standard generally defines the width of the visible contour line (coarse line), the width of the thin line such as the section line and the center line is about 3 times wider than the width. Manual drawing, for our thick line only on the outer contour line tracing will be a little rough. So, how do you control the line width in AutoCAD? The AutoCAD system is used to control the color of the line width, when we need to send a line to a certain width of the output, only need to set it to a particular color can be, because the configuration in a printer or plotter, this color has It is associated with a particular line output width, without having to give the actual width directly at the time of drawing. From the screen, only the colors vary, and each line has the same width. But after printing and printing, you can feel the width. Next, lets see how you can control the line output width by specifying the brush. When you print a graphic, the system displays the print configuration dialog box, and when you click the button, the paint brush dialog box pops up. The left side of the dialog box shows in detail the pen number, line shape, pen width and other information of each color line. In the modify numerical value column on the right, we can modify it according to our own needs. In the color brush dialog box, under the color, select the AutoCAD object color number. In the modify value, enter the pen number. In the output of drawings, AutoCAD system will be based on the different type and different colors of the brush pen, the default number is 7 output lines for the pure black brush. In general, our drawings are not color or gray line to indicate, therefore, should be all the output line pen number is set to 7. Otherwise, red lines are specified in the model space, the actual output may be red (with colored ink), or it may be l