散热器工艺及工装设计(带编程)本科学位论文.docVIP

宁XX大学 毕业设计(论文) 散热器工艺及工装设计(带编程) 所在学院 专 业 班 级 姓 名 学 号 指导老师 摘 要 本文是对散热器零件加工应用及加工的工艺性分析，主要包括对零件图的分析、毛坯的选择、零件的装夹、工艺路线的制订、刀具的选择、切削用量的确定、加工工艺文件的填写。选择正确的加工方法，设计合理的加工工艺过程。此外还对散热器零件设计了专用夹具. 机床夹具的种类很多，其中，使用范围最广的通用夹具，规格尺寸多已标准化，并且有专业的工厂进行生产。而广泛用于批量生产，专为某工件加工工序服务的专用夹具，则需要各制造厂根据工件加工工艺自行设计制造。本设计的主要内容是设计。Abstract This article is on the radiator parts processing application and processing technology and analysis, including the parts of the plan, the choice of blank, the clamping, the craft route making, tool selection, the determination of cutting conditions, processing documents. Choose the correct processing methods, design the reasonable process. In addition to the radiator parts designing special fixture. Machine tool fixture of many kinds, among them, the most widely used common fixture, size specifications have been standardized, and a professional production plant. While widely used in batch production, specially for a workpiece processing services for the fixture, it needs each factory according to workpiece machining technology to design and manufacture. In this paper, fixture design are the main contents of design for milling machine. The main task is to design a machine radiator the processing technology and CNC milling, used in the design of the first design process in accordance with the processing technology to NC milling; designed to focus on NC milling. Key Words: radiator, processing technology, processing method, process documentation, fixture 目 录 摘 要 II Abstract 1 目 录 2 第1章 绪论 1 1.1 机械加工工艺概述 1 1.2机械加工工艺流程 1 1.3夹具概述 2 1.4机床夹具的功能 2 1.5机床夹具的发展趋势 3 1.5.1机床夹具的现状 3 1.5.2现代机床夹具的发展方向 4 第2章 散热器的加工工艺规程设计 5 2.1零件的分析 5 2.1.1零件的作用 5 2.1.2零件的工艺分析 5 2.2确定生产类型 6 2.3确定毛坯 6 2.3.1确定毛坯种类 6 2.3.2确定铸件加工余量及形状 6 2.3.3绘制铸件零件图 6 2.4工艺规程设计 7 2.4.1选择定位基准 7 2.4.2制定工艺路线 7 2.4.3选择加工设备和工艺设备 9 2.5 切削用量及工时计算 9 2.5.1粗铣装配端面，使粗糙度达到6.3 9 2.5.2精铣装配端面，使粗糙度达到3.2，达到图纸尺寸公差 11 2.5.3 钻周边22XΦ5的孔 13 2.5.4钻周边8XΦ8的底孔Φ7.5 14 2.5.5 铰孔8XΦ8 14 2.5.6 翻面，铣另一面周边面 15 2.5.7 铣散热隔板槽 17 2.5.8 铣散