永磁同步电机在电梯开辟应用的平安性和靠得住性(国外英语资料).doc

永磁同步电机在电梯开发应用的安全性和可靠性 WTD/YBT/YTD series elevator special motors An elevator traction system using a permanent magnet synchronous motor is usually a gearless traction system. The advantages of permanent magnet synchronous motor are easy to be made at low speed and high power. The utility model has the advantages of compact structure and complete functions, and is composed of a traction motor, a traction wheel, an electromagnetic brake and a photoelectric coder, and is easy to install and easy to use. Especially in the development and application of the inorganic elevator, the permanent magnet synchronous traction motor is installed in the hoistway of the elevator, which saves the construction cost of the computer room and beautifies the appearance of the building. The control chart is shown in figure 4. When the elevator load changes, the permanent magnet synchronous motor is adjusted by the angle of 8 to adapt, and its response speed is very fast. In order to improve the comfort and accuracy of the elevator, the accurate rotor position device and voltage and current detecting device are added to the system to determine the size and direction of the motor magnetic field at any time. The position detecting device adopts a rotor position sensor (photoelectric encoder or rotary transformer, etc.). The car load detection device can adopt the position type, pressure type and other forms, to advance the measurement and calculation of lift load, given the proper direction and magnitude of the torque output switch analog (voltage) and frequency (high frequency and strong anti-interference, can teleport) etc.. The performance of the feedback signal can be better than that of other drive systems by comparing the feedback signal with the given signal and operating it according to the predetermined control mode. The safety and reliability of 5 permanent magnet synchronous motor used in elevator development The permanent magnet synchronous motor can be developed and utilized in