海内凹印的数字制版的三种方法(国外英语资料).doc

国内凹印的数字制版的三种方式Three ways of digital gravure printing in ChinaI. electronic engraving machineElectronic engraving machine is application integration, automation control and other modern technology, with high quality and stability of precision machinery. According to the German Hell engraving machine as an example, frequency range: 40- 140 4000Hz- 8000Hz cable line / cm, the original color after making, by RIP 1- after Bit Tiff graphics format or notes unit sent to the electric carving machine workstation, through the digital signal to drive the needle on the surface of diamond engraving vibration plate copper drum, carving out the pit. The diamond carving head is four pyramid shape. The V shaped pits made by electric engraving heads not only change in depth, but also change in area size, thus completing the halftone reproduction of text and graphics.Electric carving all production data acquisition in digital form, can be used in the follow-up work, strong reliability. The original start from the scanned into digital signal sent by the software division and transmits electric carving machine or color proofing machine, so that the production process of standardization is very favorable, so the quality of printing more assurance. And electric carving workstations using TIFF graphic data transfer through HelioLight group edition workstation for convenient integration and set working parameter configuration, produce electric carving curve by engraving software, record and display parameters of electric carving carving, until the CD file (convenient use and repeated revision).Electric engraving technology is relatively mature, simple control, layered restore realistic. The disadvantage is the amount of ink on the ink layer on the finite field, some rough substrate covering power shortage; because the net wall split between machine carving network points and network points, the line edge inevitably consists of network point serrated edge, when printing fine writing is not c