燃具(国外英语资料).docVIP

燃具 1. Ask: why does the flameout protection stove need to stay for a while while sparking? Answer: flameout protection is through a thermocouple fixed to the cover of the fire to feel the external heat changes, to ensure that in the case of unexpected flameout, gas cooker can automatically cut off the gas source, so as to ensure personal safety. There are two aspects of the influence of the thermocouple, the flameout protection in hand, he cut off gas accident flameout protection in a very short period of time, on the other hand, ignition, thermocouple only feel the outside world to make a certain amount of heat, ventilation pipe is smooth, the international rules of this time is 45 seconds, 2, Q: the use of liquefied petroleum gas Juh hours what measures should be taken? Answer: liquefied petroleum gas stove normal flame flame flame was a light blue, clear, height of about 20mm, with a slight noise, strong firepower. If flames appear very small, the causes and removal are as follows: 1) the burner, the fire cap and the fire hole are blocked by dirt, which prevents the mixture of gas from flowing out of the burner and clean the dirt of the fire hole. 2) nozzle blocked, unscrew nozzle clean up. 3) the air inlet and nozzle of the regulator are blocked by rust, which prevents the gas from flowing out of the bottle and changes the qualified voltage regulator. 4) the hose is flat, the ventilation is blocked, the straight rubber tube is obstructed. 5) in addition, the gas is about to be used, the valve is not fully open, and other reasons should also pay attention to, you can take appropriate measures to solve. 3, Q: soup overflow extinguish fire phenomenon in the daily cooking process of the user, then there will be no burning phenomenon, how to deal with? Answer: is mainly because the ignition needle caused by damp. This time, do not give up because you can not automatically spark. Please use matches or lighters ignition, gas stove is normal combustion time after the re