电磁阀工作原理解析(国外英语资料).doc

电磁阀工作原理解析 Solenoid valve at home and abroad from the principle is divided into three categories (i.e.: direct acting, step by step, and the amount of pilot) from different and principle of the valve structure and materials on the divided into six branch type (straight action diaphragm structure, step by step heavy plate structure, pilot film type structure straight moving piston structure, direct acting piston structure step by step, the pilot piston structure). For small automatic control equipment, the trachea is usually made of 8~12mm industrial rubber tube. In electrical terms, two - bit three - way solenoid valve is generally single electric control (that is, single coil), two - bit, five - way solenoid valve is generally double - control (that is, double coil). Coil voltage levels generally use DC24V, AC220V and so on. Two position three way solenoid valve is normally closed and normally open type two, normally closed type refers to the coil is not energized when the road is broken, the normally open type refers to the coil is not energized when the road is. Normally closed type two bit three way solenoid valve action principle: to the coil energized, gas line through, once the coil is switched off, the gas path will be disconnected, which is equivalent to inching.. Normally open type two bit, three way single electronically controlled solenoid valve action principle: to the coil energized, gas path off, once the coil is switched off, the gas path will be connected, and this is inching.. Two position five way double solenoid valve action principle: to action coils are connected (action gas path was made, the porosity gas) even if the action is the coil power action is the gas path is still connected, and will be maintained until the coil power to counter action. Coil power to counter action, then the gas line anti actions connect (to make holes reactionary gas), even if the coil moves to the counter gas path after the power is still connected, and will be mai