笔记本内存扩展(国外英语资料).docVIP

笔记本内存扩展 Extending memory and upgrading memory helps to improve system performance. By performing this approach step by step, you can successfully upgrade random access memory (RAM) for all HP and Compaq desktop computers. The picture may not match your specific computer model, but the steps are the same. Please read all the instructions carefully before you install the memory. Note: Dont buy memory modules until you know the type of memory used by the computer, how much memory the computer can use, and whether the computer has an empty memory slot. Install memory Perform the following steps to install memory on a HP or Compaq desktop computer: Note: important tips! You may find that your HP or Compaq desktop computer can install 4 GB or more of physical memory. However, the maximum memory may be further restricted by the operating system and cannot address all physical memory. The addressable memory of the 32 bit operating system (such as the 32 bit type of Windows, 7, Vista, and XP) is about 3.3 GB. The restriction is for all 32 bit hardware and 32 bit operating systems, not only for HP and Compaq computer systems, but also for Microsoft software operating systems. Step 1: find the memory information of your computer model For information about the memory specifications of your HP computer, please refer to the description of the memory section of the machine configuration Be careful: Because the number of configurations can be allowed, if the DIMM array containing DIMM are not from the same manufacturer, with different CAS delay value, or with different density (or collaborative use), part of the motherboard memory may not be configured properly. To ensure that your installed memory is compatible, make sure that all DIMM are of the same type, from the same manufacturer and meet the basic memory requirements of your computer motherboard. Step 2: confirm how much memory you can add Perform the following steps to see the specific memory configuration and how much mem