继电保护测试仪(国外英语资料).docVIP

继电保护测试仪 Introduction of JBC-03 relay protection tester JBC-03 microcomputer relay protection tester is a highly intelligent and multifunctional relay protection calibration instrument developed by our factory on the basis of the original. This instrument adopts microcomputer technology, microcomputer, logic control unit, AC DC current voltage output unit, high precision data acquisition unit, LCD liquid crystal display, real-time clock, printer, high measurement accuracy, good repeatability. The instrument also has the advantages of beautiful appearance, reliable performance, simple operation, complete function and so on. It is an ideal testing instrument for checking the relay protection device. This instrument can test various AC and DC current, voltage, intermediate, signal, reclosing, differential and so on many kinds of single relay and whole group relay protection screen, can test the relay pull in voltage (current) value, release voltage (current) value, various contact (normally open and normally closed, conversion, pull delay) time and off time, automatic test three times, three times and the mean calculated automatically, can print test results. The characteristics of JBC-03 relay protection tester Because this machine adopts the microcomputer control, the Chinese character prompt operation. This machine also has the function of self checking and error reporting. After starting the machine, the machine is put into self inspection immediately, which makes the inspection and maintenance very convenient. Such as pull in voltage, off voltage, normally open pull time and so on. Main technical parameters of JBC-03 relay protection tester 1 、 AC voltage output: 0 ~ 250V continuous adjustable, the maximum output capacity of 1000VA 2 、 AC current output: 0 ~ 20A, 0 ~ 100A continuous adjustable The open circuit voltage is 20A at 0 to 5V The open circuit voltage is 100A at 0 to 10V 3 、 DC voltage output: 0 ~ 300V continuous adjustable, maximum 3A 4 、 DC current outp