罕见的不干胶标签印刷工艺简介(国外英语资料).docVIP

常见的不干胶标签印刷工艺简介 Brief introduction of printing process of common adhesive labels 1. convex print The letterpress printing self-adhesive labels, printing plate for letterpress printing photosensitive resin, the label has the advantages of full color, but now printing equipment quality difference is bigger, some are still in use flat embossing machine, some ordinary rotary letterpress machine, and some have used the hatchback, satellite or unit type self-adhesive label printing machine of professional, it is not in the transition to generalize. Professional self-adhesive printing machine with embossed mainly, has the ability to print film label, but need to contact the supplier, the replacement of some components, such as increasing the servo motor control of the tension control system, additional film surface treatment unit, some high-end machines can also increase the precision alignment system. In addition, the power of the UV light source should be adjusted appropriately. For the use of rotary letterpress printing machine, flat label printing enterprises, if printed film label, the photosensitive resin plate for high elasticity flexible version, suitable for flexographic water-based ink or UV ink, change the nature of the ink to the substrate change. 2. offset printing Offset printing is the main way of printing paper sticker in our label printing factory. Offset printing is characterized by fine graphics and text, rich levels, suitable for large quantities of printing, and printing equipment can be a machine, multi-purpose, suitable for Chinas label market features. But sheet fed offset printing is not suitable for printing surfaces without absorbent films, because film labels are mostly volume to volume printing and require volatile drying inks. Offset printing can be printed more thick plastic materials, such as in mold labels, labels, tags, but the machine must be equipped with UV curing device, you need a lot of money. 3. flexo printing At present, flexo prin