金属塑性成型设备(国外英语资料).docVIP

金属塑性成型设备 1. according to the process of use can be divided into several classes which hammer? Answer: free forging hammer sheet stamping hammer According to the drive usually can be divided four kinds of the hammer? Answer: steam - air hammer, air hammer, hammer, hydraulic hammer What are the main parts of an air hammer? A: part of the work: including the falling part (piston hammer rod and upper anvil block) and hammer anvil (lower anvil, anvil pad and anvil) Transmission parts: the motor belt and pulley gear, crank arm, connecting rod and compression piston Control part is composed by the rotary valve sleeve and the valve on the rotary handle etc. Body: it consists of working cylinder, compression cylinder, column and base With air hammer operating mechanism -- what is the role? Answer: air hammer can realize air compression and strike action suspended travel 2. what is the hammer energy of anvil? Answer: blow energy performance parameters of hammer, hammer blow speed instantaneous drop to zero, is the impact of the work, can have a great impact force. Eo= (1/2) m? V2 m - dropping weight (kg) V - striking speed (m/s) of partial contact forgings According to the structural form of steam - air hammer hammer can be divided into what kind of? Answer: single column type double column bridge free forging hammer Steam air hammer hammer which operating characteristics? Answer: a operates with pedals The B pedal can simultaneously drive the throttle valve and the slide valve to realize the adjustment of the intake pressure and the intake volume at the same time, so as to guarantee the different striking energy needed for the different die forging processes C in the work cycle of swing cycle instead of hanging, when release the footrest, hammer in travel back and forth above the swing; to die, only the pedal can ensure the speed when forging at any time to adjust the strike energy and strike according to process requirements, and to simplify the operation. Hammer and hammer