锅炉高级工取证实际操纵模拟试题及谜底(国外英语资料).docVIP

锅炉高级工取证实际操作模拟试题及答案 The boiler senior engineer obtains the actual operation simulation test questions and answers First, ignition water before the water system valve switch status? (10 points) 1, the water gauge of the steam valve, water valve are opened, the drain valve closed. (2 points) 2, the main valve and its bypass are closed, the main valve before and the main drain valve opens, the air door opens, the exhaust valve opens. (3 points), and the 3 Main Feedwater bypass valve, electric control valve, drain valve economizer, one or two drum emergency blowoff valve, the fixed row one or two row valve, regulating valve, drum dosing gate, the gate, superheater backwashing valve, the valve closed reduction water system. When the economizer is recirculated, turn off the water and turn on the water when it is closed. (5 points) what are the precautions in two and when the car is in steam? (20 points) should contact with the adjacent boiler stoker 1, and steam, keep the pressure stable, pay attention to monitoring the steam temperature and pressure changes. (2 points) 2, and the steam, if there is any impact on the operating system failure and abnormal phenomena should be stopped and steam. (2 points) 3, in accordance with the steam conditions, and after the completion of the steam preparation, notify the scheduling permission, slow start the main valve. (2 points) 4, and when the steam belt load can not be too fast, generally less than 15.4T/min. (2 points), with 5 load process, should maintain combustion and steam temperature, steam pressure, water level stability. (2 points), with 6 load process, should be based on the steam temperature, steam pressure, closed gradually into the air exhaust valve, to increase the amount of coal, should prevent the abnormal increase of steam temperature. (3 minutes) 7, and then start recording the running log. (1) 8, and the end of steam, the steam water system to assistant stoker to conduct a thorough inspection, all valves should be