Infineon产品介绍资料.ppt

* 3 key points should be addressed: Lower siwitching loss Lower conduction loss But matin higher ruggedness and good EMI * 40% * * * * * * Example of Inverter Size OptimizationDPak vs D2PAK DPAK needs 1/3 board size of D2PAK * RC-DrivesMajor Customer Benefits Price In combination with driver IC - discrete solution cheaper than IPM Space PCB size reduction Increased flexibility of PCB layout Performance Vce(sat) optimised and best Eoff balanced for low losses Soft switching for low EMI levels Excellent thermal behaviour with copper layer design Tj(max) of 175°C * Contents Infineon new high speed3 IGBT Infineon RC-drives IGBT Aircon split system with Infineon high speed3 RC-drives IGBT IGBT overview * Aircon split system A Dual motor kit reference design was developed both in surface mount and straight leads version of RC-Drives: 15A RC-Drives Ipak 15A RC-Drives Dpak 4A RC-Drives Dpak 6ED gate driver * Dual motor kit for 1 kW Aircon Split systems: Compressor stage 1 kW with 6-channel EICEDRIVER and 15A RC-Drives IGBTs in D-PAK Fan stage 200W with 6-channel EICEDRIVER and 4A RC-Drives IGBTs in D-PAK PFC switch with High speed 3 IGBT and Emcon boost diode XC165 16Bit MCU card Aircon split system * Aircon split system: compressor inverter D-pak version Inverter with 15ADpak IGBTs is powered to drive an 1.5 kW AC motor + brake system By adjusting DC brake and motor speed different output powers are achieved The case temperature is monitored for different power levels with an IR camera after steady state conditions AC Motor DC Brake Power meter IR camera * A plastic shield is added to avoid any air flow from the rotating shaft of the motor may hit the Heatsink Aircon split system: compressor inverter D-pak version * Aircon split system: compressor inverter D-pak version 759 W Output ? Tc,max= 66.7 °C * Aircon split system: compressor inverter D-pak version 1066 W Output ? Tc,max= 84.5 °C * 1217 W Output ? Tc,max= 99.4 °C Aircon split system: compressor in