juniper 静态路由 六种option.docxVIP

juniper?静态路由?六种option ??? 1. directly connected ip address 直连接口的ip地址??? 2.remote ip address 下一跳地址??? 3.reject 是一个null值,下一跳匹配这个值的路由会被丢弃,会给源回复icmp不可达??? 4.discard 类似于reject 丢弃?? 会直接丢掉路由,不给提示??? 5.qualified next hop 有资格的下一跳这个属性给浮动静态路由这种环境使用??? 6.lsp 走标签路径??? # help reference routing-options static??? static??? Syntax??? static {??? defaults {??? static-options;??? }??? rib-group group-name;??? route destination-prefix {??? next-hop;??? qualified-next-hop address {??? metricmetric;??? preferencepreference;??? }??? static-options;??? }??? }??? Hierarchy Level??? [edit logical-routers logical-router-name routing-instances??? routing-instance-name routing-options],??? [edit logical-routers logical-router-name routing-options],??? [edit logical-routers logical-router-name routing-options rib??? routing-table-name],??? [edit routing-instances routing-instance-name routing-options],??? [edit routing-options],??? [edit routing-options rib routing-table-name]??? Release Information??? Statement introduced before JUNOS Release 7.4.??? Description??? Configure static routes to be installed in the routing table. You can??? specify any number of routes within a single static statement, and you??? can specify any number of static options in the configuration.??? Options??? defaults--Specify global static route options. These options only set??? default attributes inherited by all newly created static routes. These??? are treated as global defaults and apply to all the static routes you??? configure in the static statement. This part of the static statement is??? optional.??? route destination-prefix--Destination of the static route.??? * defaults--For the default route to the destination. This is??? equivalent to specifying an IP address of 0.0.0.0/0.??? * destination-prefix/prefix-length--destination-prefix is the network??? portion of the IP address, and prefix-length is the destination??? prefix length.??? * nsap-prefix--nsap-prefix is the network service access points??? (NSAP)