AC68U刷CFE(国外英语资料).docVIP

AC68U刷CFE(国外英语资料) Method 1: download the American version of CFE, and refer to the BBS post [CFE large collection] from US, sharing Apply the brush tool directly to the asus router If you want to do the same thing with the asus router, here are two things to keep in mind: Until 1. Press and hold the RESET switch on the power lights started flashing (original firmware, Tomato or dd-wrt is extinguished) into the mini - CFE mode, can brush with strong original software firmware rescue. This is also a necessary process for the asus router to update the third party firmware. Press the WPS until the power lamp flashes and then let go, clearing NVRAM. I was amazed at how easy it was to find this method, and I didnt know if it had worked for 30 to 30 to 30... Different sets of firmware will be done before and after each other. Method two: CFE and CFE can be extracted under DD! 1: write the DDWRT in any version as long as its AC68U 2: using the Telnet into the routing system at software SecureCRT or attention to brush after the DD Whether or not you have to modify the user name His name is always the root password is you modify the password Here we extract the CFE from the TMP directory Execute the command: Dd if = / dev/MTD / 0of = / TMP/boot.bin At this point, the TMP directory will be routed with a new boot.bin file. This is the AC68U CFE! 3 use the WinSCP software to route the user name root password. You modify the incoming route to the parent directory and you will see the TMP directory and copy the boot.bin file Modify the boot.bin file and use the UltraEdit WinHex as a 16-point editor. Look for the code keyword and youll find two code = XX (XX for the EU, JP, etc.) to change the XX to US (or any other country code). Notice that there are two things in the code = JP, the first one is 2.4 G and then the 13 is reduced to just 11 and the second is 5G If you want to change it to the mainland version, CN (2G is 1-13, 5G is 149, 153, 157, 161, 165) You can also change it to