Cisco交换机配置DHCP方案(国外英语资料).docVIP

Cisco交换机配置DHCP方案(国外英语资料) The solution: One, if you dont use the DHCP function of the switch, you use the PCs DHCP functionality! Configure the DHCP server on the switch: IP DHCP - server 9 Set the same IP address for the same DHCP server for each VLAN in the switch: Interface Vlan11 IP address IP helper - address 9 DHCP Server IP Interface Vlan12 IP address IP helper - address 9 DHCP Server IP Set the network address on the DHCP server for , , and road to these scopes The selector option is set to the interface IP address corresponding to the VLAN. Using the DHCP functionality of the three-layer switch, the IP address of multiple vlans is automatically allocated (1) configuration method 1 Assign addresses to multiple vlans There are partial addresses in VLAN that are manually allocated Specify gateways, Wins servers, etc VLAN 2 has a valid period of 1 day, and the other 3 days Assign the specified IP address to a specific user by the MAC address The final configuration is as follows: IP DHCP deal-address 10.1.19 / / the address that is not used for dynamic address allocation IP DHCP excluded - address 410.1.254 IP DHCP deal-address 9 ! IP DHCP pool global / / global is pool name, specified by the user Network 255.0.0 / / dynamically allocated address segments Domain-name / / configure the domain suffix for the client DNS - server / / configure the DNS server for the client Netbios - name-server .6 / / the wins server for the client Netbios - node-type h-node / / for the client configuration node pattern (which affects the success of the name interpretation, such as h-node = first through the wins service) To explain... ) Lease 3 / / address lease term: 3 days IP DHCP pool vlan1 Network / / this pool is the child pool of global, inheriting domain-name from global pool The option Default-router 01.101 / / configure the default gateway for the client ! IP DHCP pool vlan2 / / pool for another VLAN configuration Network Default - router 00 01 Lease 1 ! IP D