EC与BIOS间的关系和上电原理(国外英语资料).docVIP

EC与BIOS间的关系和上电原理(国外英语资料) In our normal work and life, always want to dig deeper below the surface of his connotation, to pursue their lofty ideal, so that to reach the highest realm. In this paper, the paper discusses the EC and the power supply of the bottom layer of the notebook to improve the maintenance theory level of the notebook. The BIOS (basic input/output system) is very important in the overall system, and it implements the bridge between the underlying hardware and the upper operating system. Like you now from CD copy a file to the hard disk, you just need to know copy and paste command line, you dont need to know how it is read from the CD, then how to write to the hard disk. For the operating system, you just need to send instructions to the BIOS, without knowing how the disk is read and how the hard disk is written. The BIOS builds the bridge between the operating system and the underlying hardware. The BIOS Settings we normally say only talk about the Settings of their software, such as setting the boot sequence, disabling/enabling some features, and so on. But heres the question, how does the BIOS work on hardware? After all, is software running on a hardware platform? We cant just talk about EC here. L, r The EC (embedded Controller) is a 16-bit single chip, and it also has a certain amount of Flash in itself to store the EC code. The EC is not inferior to the north-south bridge in the system, and the EC controls the sequence of most important signals in the process of system opening. In the notebook, the EC is always open, whether you are turning on or off, unless you remove the battery and Adapter completely. In the shutdown state, the EC keeps running and waits for the user to turn on the information. And after the boot, EC is more as a keyboard controller, charging indicator light and fan and other various devices such as light control, it controls the system even on standby, dormant state, etc. In the mainstream notebook system, v D minus | 5