netsh实用命令,使用教程(国外英语资料).doc

netsh实用命令,使用教程(国外英语资料) The netsh utility command, use the tutorial Netsh is a command-line utility that allows users to display or modify the network configuration of the currently running computer either locally or remotely. Netsh also provides scripts that allow users to run a set of commands for a given computer using batch mode. The Netsh utility can also save configuration scripts in text files to archive or help configure other servers. Setting up network parameters is an easy thing to do; But its easy to get into trouble if you encounter a particular situation. It doesnt, once your system with the strange disease, cannot open TCP/IP system parameter Settings window, then modify the network parameters will be difficult at this time. However, in the Windows 2000 operating system or above, you can use the built-in network configuration command, Netsh, to modify the network configuration parameters in the DOS environment. In order to help you better use the Netsh command, this article has come up with some of the configuration tips for this command, which I believe will help your network administrators! Save the network Settings Computer systems in order to avoid the sudden failure occurs, which leads to the loss of network parameters, you can normal Internet access in the system, to save network parameters into a text file, in order to reinstall the system, can quickly restore. In to save the current network configuration parameters, you can be in the start menu first, implement the run command, open the run dialog box, in which the input string CMD commands, click the ok button, the screen to switch to the ms-dos state; In the DOS command line, the input string command Netsh - c interface dump c: \ config TXT (note that the command of symbol is used to redirect the file), click the enter key, the current network configuration parameters are automatically saved to the c plate, a config. TXT text file, of course, you can also specify other store location. Open