ospf常用命令(国外英语资料).docVIP

ospf常用命令(国外英语资料) OSPF configuration commands The Router (config) # Router ospf 10 process number is only valid locally The Router (config) # network 192.168.10.0.0.255 area 0 is all available The Show IP separate protocols Show IP route looks at the routing table Show IP route ospf looks at the ospf routing items in the routing table Show IP ospf neighbors [detail] displays the ospf neighbors Show IP ospf displays information about the ospf router Show IP ospf interface f0/1 [brief] displays the ospf information for the interface Show IP ospf database [router] displays various LSA Show IP ospf database router 192.168.20.2 Debug IP ospf of shows the building of a neighbors relationship Ospf border - Show IP routers can see ASBR and ABR, but cant see their own role, can only see the role of other routers Show IP ospf database-summary LSDB summary information Check out the various LSA methods: The Show IP ospf database router looks at a class of LSA domains The Show IP ospf database network looks at the second class LSA MA network Show IP ospf database summary looks at three LSA domains Show IP ospf database asbr-summary for four classes of LSA The Show IP ospf database external looks out the five classes of LSA Show IP ospf database nssa - external to see the seven LSA classes Specify RID, modify the router priority, modify the hello interval, dead time, interface bandwidth, the cost of the ospf interface, and modify the numerator of the cost equation The Router (config-router) # Router -id 1.1.1.1 specifies the RID Router (config-if) # IP ospf priority 0-255 notice changes under the interface IP Router (config - the Router) # clear ospf process to restart the ospf routing process, if you want this Router as DR, after changing the priority use this command to restart the process to become the DR Router (config-if) # IP ospf hello - interval 10 Router (config-if) # IP ospf dead - interval 40 is four times the default for hello The Router (config-if) # bandwidth 5000 m