The difference between a layer 2 switch and a three-layer switch二层交换机和三层交换机的区别(国外英语资料).docVIP

The difference between a layer 2 switch and a three-layer switch二层交换机和三层交换机的区别(国外英语资料) A work, a hub in the physical, bite into, watch out, function is to connect multiple lines together, the data in the process of long distance transmission attenuation, transmission quality can still keep data transmission over a long distance. Two, switches working in data link layer, the function is to break up collision domains, segmentation is not a broadcast domain, according to the MAC address table for forwarding data, but the switch can be divided into VLAN, to divide broadcast domains. The data is attenuated over long distances, with a switch in 100 megabytes, which still ensures the quality of the data. The router works on the network layer, and the router works by searching the routing table for the routing table based on the packets destination IP. The routing table records the corresponding relationship between the network segment and the interface that the router can reach. Four, three layer switch, and work at the data link layer is also work in the network layer, will switch and routing functions are integrated into the together, the switch is forwarded by the hardware data, and the router is forwarded by software data, layer 3 switches to the network layer data is forwarded by the hardware, layer 3 switches to fully improve the speed of forwarding data. This is also the biggest bright spot of the three-layer switch, so the price is also more expensive! The biggest difference: the physical layer of the hub. Switches work on the data link layer, and the three layer switches, the data link layer of the work, also work on the network layer. Layer 2 switch, 3 layer switches, 4 layer switches Layer 2 switching technology is the development of more mature, the layer 2 switch equipment belong to the data link layer, to identify the MAC address information in the packet, based on MAC address forwarding, and record the MAC address with the corresponding port in its own inter