The meaning and setting method for setting options in the AWARD BIOSAWARD BIOS中设置选项的含义和设置方法(国外英语资料).docVIP

The meaning and setting method for setting options in the AWARD BIOSAWARD BIOS中设置选项的含义和设置方法(国外英语资料) Hello, I am a friend, today is boring, let my friends learn something more, xi xi... Just want to order water, but also be useful, is a very good opportunity for beginners, because it is Chinese translation, need not use mind, also dont need to seek data. It will make a great impression. Well, Im not good at it, but lets get to the point. The AWARD is one of the worlds largest manufacturer of BIOS, and its products are widely used. But due to the inside of the AWARD BIOS information is based on English and requires the user to the understanding of the relevant professional knowledge relatively deep, make ordinary users to set up difficulty is very big. And if these are not properly set up, it will affect the performance Settings of the entire computer, so a detailed set of instructions is necessary. Here is an introduction to the meaning and setup of the Settings options in the AWARD BIOS. [Standard CMOS Setup] In this menu, the user can modify the date, time, the first main IDE device (hard disk) and IDE devices (hard disk or cd-rom), the second main IDE devices (hard disk or cd-rom), and from the IDE device (hard disk or cd-rom), floppy drive A and B, the type of display system, any error condition to lead to suspension system startup, etc. The main instructions are as follows: (1) the user can be set to Auto in Type (Type) and Mode (Mode), so that the BIOS automatically detects the hard disk. You can also set it up in the main menu (IDE HDD Auto Detection). Users can also use the User option to manually set the parameters of the hard disk. You must enter the number of cylinders (Cyls), head count (Heads), writing precompensation (Precomp), head landing zone (Landz), each cylinder sectors (Sectorxs), work Mode (Mode, see below) and so on several parameters. The size of the hard drive is automatically generated after the parameters are set. Three options for the har