THINKPAD笔记本Fn组合键介绍(国外英语资料).docVIP

THINKPAD笔记本Fn组合键介绍(国外英语资料) THINKPAD notebook Fn combinatorial key The Fn key is used as a combination of the notebook and can be used in combination with other keys, and many of the techniques are implemented using the Fn composite key. Heres a summary of some of the features of the IBM ThinkPad notebook Fn key: Fn + F3 closes LCD display screens, making screen no display. (when you listen to a song, its more efficient to turn off the screen.) Fn + F4 enables the system to enter suspend mode. To recover from the suspended state, press the Fn key (dont press other keys). Fn + F5 opens/closes the built-in wireless network signal (IEEE 802.11 wireless network). If you press this button, a wireless signal control window will appear, listing the current available wireless devices. Users can quickly change the power of these wireless devices in this window. (FN + F5 is new function, since T40 and X31 for bluetooth module is not installed, the bluetooth option does not appear, if there is not even wireless network card module, the interface wont appear, press FN + F5 wont have any response.) Fn + F7 switches between the LCD and the external display to display the output (using a projector or an external monitor) Fn + F8 when the resolution of the screen resolution is less than the actual, press this key combination can be extended to screen on or off, makes the screen to switch between normal mode and extension mode Fn + F9 opens the IBM ThinkPad EasyEject Utility program, which displays the following buttons: The Eject ThinkPad PC from X4 UltraBase: if you have an X4 UltraBase base on your laptop, it will display the button. This button will disable the X4 UltraBase base Run EasyEject Actions: the user can select, disable, and uninstall the external device connected to the laptop Configure EasyEject Actions: this button user can open the IBM ThinkPad EasyEject Utility program main interface Fn + F12 allows the computer to go into hibernation mode Fn + PageUp opens/closes