vmware下mount命令介绍(国外英语资料).docVIP

vmware下mount命令介绍(国外英语资料) Mount the cdrom and usb mount mounted under Linux under vmware installation I will say the following: 1: click vmware with a mouse and move the focus to vmware 2. Insert the USB drive and the system will automatically identify (as long as the VM has a USB drive) 3. Set up mount directory, general # mkdir/MNT/udisk And then he automatically detects it, and then he looks at it with fdisk - l, [root @yyl -0377 root] # fdisk - l Disk/dev/sda: 5368 MB, 5368709120 bytes 255 heads, the 63 sectors/track, 63 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot End Blocks Id System /dev/sda1 * 1 574 4610623 + 83 Linux / dev/sda2 575 652 626535 82 Linux swap Disk/dev/SDB: 130 MB, 130416640 bytes 8 heads, 32 sectors/track, 995 cylinders Units = cylinders of 256 * 512 = 131072 bytes Device Boot End Blocks Id System /dev/sdb1 * 1 995 127344 b Win95 FAT32 4. The device name of the last line is critical. Mount # mount /dev/sdb1 / MNT/udisk Then you can go to/MNT/udisk. Then you can read and write and use when you want to remove it # umount - l/dev/sdb1 For example, this is the case for the problem For example, this is the case for the problem Supplement: Ive been puzzled by this problem for a long time, and Ive studied the method in N, and now Im going to do it in my own way. I read a lot of articles, and they are all very incomplete. It seems that only self-study is the only one. The practice is true!!! Use usb drives, V disks, and the ultimate way of moving hard drives 1, use lsmod to look at usb-storage, usb -uhci, sd_mod, and scsi_mod to load If you are your own compiled kernel, this is all compiled and you dont need to load it Use the dmesg | grep usb to see if usb is loaded 4, try to use fdisk - l/dev/sda (SDB/SDC/SDD) see in which east and connection, if you are using SCSI hard drives, so it is commonly SDB if you use the IDE hard disk is commonly sda If there is a hint similar to the fdisk -l/dev/HDC (your hard drive), congratulati