两台电脑桥接方法(国外英语资料).docVIP

两台电脑桥接方法(国外英语资料) In order to easy to distinguish between that object, the following will be fitted with double nic client called customer, added the clients referred to as the B customer, specific connection and set the method is as follows: Lets say that the network segment used is 192.168.0.x. Make sure the customer first A access to resources and the Internet, LAN and configured double card, which is connected to the hub of the network card IP address , connected to the network card IP address is customers B . Open network and dial-up connections, connect the original LAN local connection renamed local connection - the host, will be another local connection moniker for the local connection - the customer, and then use twisted-pair (double machine straight league) will be the local connection - customer corresponding CARDS and customer B on the card directly. Next to set network properties in the customer B station designated out of IP addresses and computer name, such as IP address: , computer name: customer B, other Settings, such as subnet mask, default gateway, D server and customer A machine at the same Settings. Now if A customer and customer B can access resources to each other, then that is half the battle, you need to do is to use Windows XP bridge to the local connection - the host and local connection - customer. In A customer into the network and dial-up connections window, select the local connection - customers and the local connection - the host right-click, right-click menu of bridge command, system began to bridge the two connection. If the above set everything right, this bridge will be successful. There will now be a bridge icon. Right-click the icon to select properties and set IP properties in the Internet protocol (TCP/IP) properties (see figure). For example: . Now, the customer B machine will also be able to access other computers and the Internet on the LAN, so that it will be able to share the Internet with a single Hub port on the LAN.