使用防火墙禁止端口法(国外英语资料).docVIP

使用防火墙禁止端口法(国外英语资料) A QQ function usually has a corresponding DLL file, and the individual feels that the DLL that is associated with the auto-login function will be able to solve the problem that you are talking about... Hard search:) If you can only use the method of disabling QQ, Im going to add a few methods here. One, use firewall to prohibit port method We know UDP4000 QQ to use the default port is, use a firewall to the port closed, so other people cant use QQ, when you need to surf the Internet just open the port. Below I use 6 kingsoft Internet security, click on the tools menu - general Settings - IP filtering - add, pop-up window. Enter 4000 in the port column, select UDP in the protocol column, and disable in the action column so that the UDP4000 port is closed. Once again, just select TCP in the protocol column and close the TCP4000 port. You can see that the UDP4000 and TCP4000 ports have been disabled This time you login to QQ again to try, do not always succeed! There will be a time when the connection timeout occurs, and even if you reinstall the QQ, you cant log in successfully. If you want to use QQ, you can modify the rule and change the forbidden to allow. This is not the time to go. Dont believe that you can open another QQ login window (that is, there are two QQ login window at the same time) try, no more will login successfully. Does the method we introduce dont work? Not too! This is because after multiple QQ logins on a computer, the later QQ USES the port number of 4001, 4002, 4003, that is, the UPD end of the use of a QQ, plus 1. Since we run two QQ at the same time, the second QQ USES the port number of UDP4001, not UDP4000, which is certainly successful. To be on the safe side, we need 4, 000 to 4009, 9 ports. Your co-workers will not be able to log in on a QQ, and run 10 login Windows simultaneously. Second, change the file properties of the QQ installation directory to only write QQ in the running process to correct load LoginUinLi