停车场常见问题以及故障解决(国外英语资料).doc

停车场常见问题以及故障解决(国外英语资料) Parking lot system: parking system failure analysis and processing Today I will introduce you to some of the troubleshooting and handling methods encountered in the parking lot system: 1, no communication Why: 485 communication lines are broken, short circuited or wrong. (more common) Treatment: check the communication line, check the connection, make sure the communication line is not broken, short circuit or wrong. Reason: the control plate number is set incorrectly; (more common) Processing method: check number set is correct, check other panel in the system, see if any repeat number, according to the instruction set of methods to set up immediately. Reason: managing the software communication port Settings error; (more common) Processing method: check management software in the system Settings 】 【 communications port, whether in accordance with the connection, if the control panel is connected port is a USB or PCI extension, please in the operating system device manager view port, please pay special attention to: USB extension port 232 stability is poorer, often plug can cause the port number changes, when conditions permit, try choosing PCI card serial port extension. Reason: communication ports conflict with other software; (less common) How to handle it: check whether other software has enabled the communication port and shut down other software. RS485 card damage or damage to computer serial port; (less common) Treatment: replace the rs-485 communication converter, and the computer installs the PCI serial port extension card or replace the computer. Reason: control board communication circuit failure; (less common) Treatment: repair or replace control panel For reasons: the management software version does not match the control board; (less common) Process: reinstall the software that matches the control board. Communication is unstable (intermittent) Reason: the communication line is longer, and the wiring is not standard, and the c