图像识别(国外英语资料).docVIP

图像识别(国外英语资料) xqh665544ldm 2395340274 Based on image recognition technology, the design of the mast parts test system Similar to fingerprint recognition. , for example, is to use camera down your face, and then install the corresponding software in computer memory, when the next time you switch on the camera will be according to the current image and stored image to determine the user identity, meet the requirements can boot into the page, otherwise dont get in, just like a password. But the current image recognition technology is not very good, and the recognition rate is not very high. The technology is being owned by a laptop.   Automatic Equipment Identification technologies (English name to Automatic Equipment Identification, hereinafter referred to as AEI) is a new technology developing quickly in the world, as well as the technology of the basic idea is through the use of advanced short-range communication technology, the implementation of various objects or Equipment in different states (mobile and stationary or bad environment) under the Automatic Identification and management. The most widely used automatic recognition technology is microwave technology. In the field of automatic recognition applications, the more specific names of microwave technology are microwave RFID (RFID). The following is a brief introduction to how RFID systems work. RFID read-write device by microwave antennas, RFID card is read/write device microwave activation energy, receive signals to read and write device automatically send back after microwave signal containing vehicle information, read and write device receives the RFID card after these signals, the receiver decoder to work out all kinds of information related to the vehicle, so as to establish contact RFID cartoon - read/write device. The information of the vehicle is processed by computer, which can realize automatic identification. Mechanical product quality inspection methods, such as how to detect a parts, not qualifi