多线路监控系统连接常见问题解决方案(国外英语资料).docVIP

多线路监控系统连接常见问题解决方案(国外英语资料) Multiline monitoring system connects common problem solutions (trade) telephone 6255821 QQ: 909194047 How to solve the problem by taking corresponding measures to solve the problem, improve the quality of the monitoring system and ensure the stable operation of the system is significant. Here are some of the engineering experiences of the video monitoring system and the experience of troubleshooting. 1, due to the connections between the equipment security monitoring system involves many lines, if processes is not good, especially with the main equipment and wiring or improper connection error, will appear between the open circuit, short circuit, wire insulation equipment performance degradation or even poor, false wiring is damaged. In this case, it is necessary to analyze and troubleshoot the problem according to the failure phenomenon, to determine which circuit connection problems can occur. In addition, it is important to note that the connection between the system equipment and various lines should meet the requirements of the monitoring system for the long running time. 2, the characteristics of transmission cable impedance mismatch may lead to the monitor screen produces several equal spacing bar interference, and the frequency of the disturbance signal basic integer times the line frequency. This interference is caused by the characteristic impedance and distribution parameters of the video cable. For each equipment in such interference should try to make the system impedance matching, special video cable when the choose and buy, be sure to cable quality, deal with cable sampling inspection when necessary. 3, communication interface and communication protocol parameter is not set, this often appear in the control host and decoder or control keyboard communication control relationship between devices. That is to say, the selection of control host and decoder or control the keyboard, etc., did not set up during the engineering insta