如何修复分区表(国外英语资料).docVIP

如何修复分区表(国外英语资料) How do you fix a partitioned table It is recommended that you try the fdisk/MBR command to try to restore the hard disk partition table under DOS. If you cant consider trying to restore the repair partition table commands in diskgen (originally called diskman), its also running under DOS. I recommend several restoration software 1: three after KV3000 and DiskGen nameplates, hard disk doctor is the most effective tools for a recovery partition table, because the function fully, so the reconstruction of the partition tables ability is stronger than two predecessors, for example, DiskGen although many partition table can also scan the information, but to find most are useless data, and time is too long, and three nameplates, hard disk doctor shooting obviously much higher. The doctor downloads the address: /soft/5554.htm, which is the size of 64K, which can be copied to a floppy disk or a usb drive to start your data recovery journey. 2: FDISK You can also create new partitions and rebuild master partition tables with FDISK, but this method does not override the code areas of the master boot record. If you want to keep the number of hard disks unbroken, the partition must be in line with the original partition, otherwise the data is not guaranteed. It is easy to use the hanghua version of FDISK. Reference: /question/9322158.html 3: KV3000 On the main menu of KV3000, press F10 key, can be related parameters on the system and hard disk partition table fast speed test, if the hard disk partition table is not normal, KV3000 will first will be saved to a floppy disk partition table to prevent bad dont test, automatic reconstruction of hard disk partition table again, the drive back from the dead. But if the hard drive has only one partition, and the file allocation table (FAT table), the file catalog table (ROOT table) is seriously damaged, the data is gone. So, even if you restore the C disk partition table with this feature, you will not be able to make th